Tesla Spoiler für Modell 3/Y/S/X
- Ausgewählt
- meistverkauft
- Alphabetisch, A-Z
- Alphabetisch, Z-A
- Preis, niedrig nach hoch
- Preis, hoch nach niedrig
- Datum, alt zu neu
- Datum, neu zu alt
Understanding Spoilers
What are the main purposes of installing a spoiler on a Tesla?
✅ Main Purposes of Installing a Spoiler on a Tesla
1. Improve Aerodynamics & High-Speed Stability
A spoiler helps manage airflow over the car body by reducing turbulent air separation at the rear. This reduces rear lift and helps keep the car more stable at higher speeds—making handling more predictable.
For a sleek-designed EV like a Tesla, reducing lift can enhance stability during fast driving or highway cruising.
2. Increase Traction, Grip & Braking Stability
By generating a slight downward force on the rear axle (called “downforce”), a spoiler can press the rear tires more firmly onto the road. That improves traction, especially during cornering or abrupt maneuvers, and can enhance braking stability — useful for safety during sharp braking at higher speeds.
3. Reduce Drag / Improve Energy Efficiency (Range)
A well-designed spoiler can smooth the airflow over and behind the car, reducing aerodynamic drag. Lower drag can help the car cut through air more efficiently — which for electric vehicles like Tesla, can translate into better range or more efficient energy use, especially on long highway drives.
4. Better Rear Airflow & Lower Rear Lift
Without a spoiler, air flowing over the roof tends to separate abruptly at the rear, creating lift and turbulence that negatively affects stability. A spoiler extends or reshapes the rear slope of the car to help air flow remain attached — reducing lift and making driving smoother and more stable.
5. Enhanced Safety and Handling — Especially at Speed
Because of improved stability, traction, and braking balance, spoilers can make the car safer and easier to handle when driving at high speeds, in windy conditions, or during sudden maneuvers. The rear-axle downforce helps ensure rear tires maintain contact, reducing risk of rear instability or loss of control.
6. Visual Appeal and Sporty Aesthetic
Beyond function, spoilers often give a vehicle a more aggressive, sporty, “performance-car” look. For many Tesla owners, a well-designed spoiler enhances the car’s style and makes it stand out — blending well with Tesla’s modern design language.
7. Potential for Reduced Dirt/Splash to Rear Window/Trunk
By influencing airflow and reducing turbulent wake behind the car, a spoiler can help redirect airflow in a way that reduces dirt or debris being thrown onto the rear window or hatch — potentially keeping visibility better and reducing cleaning frequency.
📌 Summary
Installing a spoiler on a Tesla primarily aims to enhance aerodynamics, stability, traction, and efficiency, especially during high-speed or long-distance driving. On top of that, it provides a sporty, premium aesthetic upgrade that many drivers appreciate. For owners who travel long distances or enjoy spirited driving, a well-designed spoiler can deliver both functional benefits and style.
What's the difference between carbon fiber and ABS spoilers?
🔍 Carbon Fiber vs ABS Spoilers — Key Differences
✅ Carbon Fiber Spoilers
Advantages
Lightweight & strong: Carbon fiber has a very high strength-to-weight ratio compared with ABS. This means you get structural strength and rigidity with minimal added weight — which is valuable for performance and handling.
Rigid, stable under load: Because of its stiffness, carbon fiber doesn’t flex or deform easily under aerodynamic pressure at higher speeds. This helps maintain aerodynamic benefits (downforce, stability) reliably.
Premium look & feel: Genuine carbon fiber has a distinctive woven texture and glossy finish, giving a high-end, sporty appearance that many enthusiasts value more than a painted plastic part.
Better long-term durability (if cared for): Carbon fiber resists corrosion and general environmental degradation (when properly coated), and because it’s lightweight and strong, it puts less stress on mounting points.
Disadvantages / Considerations
Higher cost: Carbon fiber parts are more expensive due to the materials and labor-intensive manufacturing process.
Less forgiving in impacts: While strong, carbon fiber tends to be more brittle. A hard impact (e.g., curb, rock, minor collision) can cause cracking, chipping, or fiber delamination — whereas a plastic spoiler might just flex or dent.
Potential maintenance & repair costs: Repairing or refinishing carbon fiber (if damaged) is more difficult and costly than fixing a plastic spoiler.
✅ ABS Plastic Spoilers
Advantages
Cost-effective: ABS plastic spoilers are much cheaper to manufacture and buy, offering a low-cost way to get the spoiler look or mild aerodynamic effect.
Impact-resistant and flexible: ABS can absorb minor hits or debris impacts without cracking — it flexes or deforms, which can be more forgiving in daily driving conditions.
Easy to produce and fit: ABS can be molded easily into many shapes, making mass production and fitment more straightforward — a good choice for OEM or budget aftermarket spoilers.
Disadvantages
Heavier and less performance-oriented: ABS is heavier than carbon fiber and lacks the rigidity — so under aerodynamic load (high speed) it may flex or deform, reducing downforce efficacy and long-term shape retention.
Less premium appearance: Even when painted or given a “carbon-look” finish, ABS lacks the genuine texture and sheen of real carbon fiber; many enthusiasts regard it as less “authentic.”
Potential limitations at high speeds: Because it’s less stiff and sturdy, ABS spoilers may not consistently hold aerodynamic shape under pressure, which can make their performance benefits modest or negligible compared to real carbon fiber.
🧠 What It Means in Practice — Choosing Based on Your Needs
If you care about performance, weight savings, longevity, and a high-end aesthetic, carbon-fiber spoilers are generally worth the extra cost. They perform better at speed, maintain shape, and offer a premium look.
If your main goal is budget-friendly upgrade, casual driving, or daily-use reliability, and you don’t plan to push your car hard, ABS spoilers provide a practical, impact-resistant alternative at a lower price.
For occasional driving, city use, or frequent parking/lower-speed conditions (where impacts from curbs, debris, or tight spaces are possible), an ABS spoiler may be a more forgiving choice.
If you value long-term investment and want your spoiler to age well — especially under higher-speed driving or exposure — carbon fiber is the more durable and performance-oriented option.
✅ Summary
Carbon Fiber: Lightweight, strong, rigid, and premium — ideal for performance and aesthetics; more costly but delivers best structural and aerodynamic results (when installed properly).
ABS Plastic: Affordable, flexible, easy to produce — good for everyday driving or budget builds; more impact-resistant but heavier and less performance-optimized.
In short: carbon fiber builds are the choice for performance and premium feel; ABS is a practical budget compromise.
Will the spoiler withstand weather, sun (UV), rain, and daily driving conditions?
✅ What carbon fiber spoilers do well
Strong under load, corrosion-resistant: Carbon fiber as a material is very strong and doesn’t rust or corrode like metal. That makes it inherently more durable than steel parts when exposed to water, salt, or road grime.
Good resistance to normal rain / moisture — when sealed: A properly finished spoiler (with clear coat or UV-resistant coating) repels water and handles rain or humidity just fine. The weave and resin core remain intact under normal weather exposure.
Reasonable performance under temperature changes: Carbon fiber itself doesn’t expand/shrink much with temperature changes, so large swings in heat or cold don’t necessarily deform the structure.
In short — yes, a well-made carbon fiber spoiler can handle daily driving, rain, and most weather conditions if it’s properly finished and maintained.
⚠️ Potential Risks — Sun (UV), Weather, and Daily Use
While carbon fiber is strong, there are weak points — especially related to the resin/clear coat that protects the fiber weave.
UV exposure can degrade the clear coat: Prolonged sunlight can cause the clear resin that seals the carbon fiber to oxidize. Over time this leads to fading, yellowing, dull finish — lowering the visual appeal.
Surface damage is possible from impact, debris, or improper cleaning: Rock chips, road debris, or high-pressure car-wash nozzles can crack or chip the clear coat — once breached, water or contaminants may seep in and gradually degrade the resin or cause delamination.
In very harsh climates — repeated wet-dry cycles, heat, UV + humidity — deterioration becomes more likely: In areas with strong sun, frequent rain or salt exposure (e.g. coastal regions, winter salt roads), if the spoiler isn’t periodically maintained, the resin and clear coat may degrade over time.
So while carbon fiber itself remains structurally stable, it’s actually the protective coating / resin + finish that needs care if you want long-lasting results.
🧰 How to Maximize Durability — Best Practices
To make sure your spoiler stands up to weather, sun, and daily driving for a long time:
Use UV-resistant clear coats, waxes, or ceramic-coatings — these add a protective barrier against sun, heat, and oxidation. Many carbon-fiber spoiler makers recommend or offer these treatments.
Wash gently — use pH-neutral car shampoo and a soft microfiber cloth; avoid harsh chemicals or aggressive brushes/pressure washers that can scratch or damage the clear coat.
Park in shaded or covered areas when possible, or consider a car cover — minimizing direct sun exposure helps reduce UV damage over time.
Inspect regularly — check for small chips, cracks, or dull spots. If protective coating shows signs of wear, consider reapplying protective wax/coating before damage spreads.
🎯 Conclusion: It Depends — Quality & Care Matter
A quality carbon fiber spoiler — correctly manufactured, coated, and maintained — can absolutely withstand weather, rain, and daily driving conditions without major problems. However, exposure to strong sun, UV, debris, or neglect can degrade the protective resin/clear-coat over time, which may compromise appearance or even structural integrity if not addressed.
If you’re investing in a spoiler for Tesla, it’s worth choosing a high-quality one and committing to basic maintenance. That way, you maximize lifespan and enjoyment — and keep your car looking sharp.
Could a spoiler negatively impact rear visibility or rear-window clearance on Tesla?
⚠️ How a spoiler could affect rear visibility / window clearance
Block part of the rear-window view: Some larger or wing-style spoilers — especially those that extend upward or outwards beyond the roof-to-hatchline — may intrude into the sight-line when looking back through the rear window or in the rear-view mirror. Some sources note this as a common drawback of “oversized” spoilers.
Potential obstruction when backing up or reversing: If the spoiler extends high or projects out, it might interfere with visibility of obstacles right behind the car, especially lower objects near the hatch or bumper — something some owners of similarly modified cars report when using large spoilers.
Interference with rear hatch / window cleaning / wiper path (if installed): On hatchbacks and SUVs, a poorly shaped or oversized spoiler could interfere with opening/closing the hatch or block part of the rear-window wiper’s sweep, depending on design and fitment (though this depends heavily on the spoiler’s geometry more than on spoilers in general).
✅ When a spoiler won’t significantly impact visibility — and may even help
Low-profile spoilers / lip-style spoilers: If the spoiler is a subtle lip or flush-mount spoiler that follows the roofline or hatch edge, it usually doesn’t intrude into the rear-ward view. Many OEM-style spoilers are designed with this in mind.
Proper design and fitment: Well-engineered spoilers that respect the vehicle’s rear-window geometry and eye lines are less likely to obstruct any visibility. They can improve airflow without significantly affecting what you see behind you.
Potential for improved rear-window cleanliness: In some cases, a roof spoiler can slightly redirect airflow and reduce water or dirt landing on the rear window at speed — though this effect varies widely by spoiler design and may be negligible.
🎯 What to check if you install a spoiler on Tesla
Mock-fit before final installation — hold up the spoiler in place and look through the rear window (and rear-view mirror) to see if it intrudes at all.
Choose a design suited for hatchbacks/SUVs — low-profile lip spoilers or roof-edge spoilers generally interfere far less than oversized wings.
Ensure rear hatch and wiper function remain intact — make sure the spoiler doesn’t obstruct hatch opening/closing or rear-window wiper operation if applicable.
Consider rear-camera and sensor placement — on modern vehicles like Tesla, ensure spoiler doesn’t block backup cameras, parking sensors, or other rear-assist hardware.
🧩 Conclusion
Yes — a spoiler can negatively impact rear visibility or rear-window clearance if it’s too large, poorly designed, or improperly positioned. But a well-designed, low-profile spoiler — especially one shaped for a hatchback/SUV like Model Y — usually does not have significant negative effect, and many owners find the trade-offs acceptable for the added aerodynamic or aesthetic benefits.
Is there a risk of the spoiler coming loose or peeling off over time?
⚠️ Under What Conditions a Spoiler Might Come Loose or Peel
Adhesive quality matters — If cheap or low-quality double-sided tape is used (or if the tape was compromised), adhesive strength may degrade over time.
Poor surface preparation — If during installation the trunk/roof surface wasn’t cleaned thoroughly (removed wax, grease, dust), the tape may fail. Experts say many adhesion failures stem from surface prep, not inherent weakness of good tape.
Extreme temperature swings or weather exposure — Hot sun, cold winters, heavy rain, or repeated thermal cycling can degrade adhesive over time, especially if the car is exposed to such conditions regularly.
High-speed driving or aerodynamic stress — At highway speeds, wind pressure on the spoiler can exert forces that challenge the adhesive bond — especially on wings or larger spoilers — which can contribute to loosening or peeling if not properly bonded.
Improper curing time / pressure during installation — adhesives like 3M VHB require correct surface temperature, firm pressure, and time (often 24+ hours) for full bond strength. Skipping these steps increases risk of failure.
✅ When the Risk Is Much Lower — With Good Installation & Materials
When high-quality automotive-grade adhesive (e.g. correct variant of 3M VHB or tape specified for exterior use) is used.
When surface is meticulously cleaned and prepped, including chemical cleaning (e.g. isopropyl alcohol) to remove oils, waxes, dirt — this dramatically improves adhesion.
When installation is done in proper ambient temperature range (not too cold or hot), and firm, even pressure is applied across the entire spoiler after placement.
When you allow sufficient curing time (often 24–72 hours) before exposing to rain, car washes, or high-speed driving — many adhesive manufacturers highlight this as essential for bond strength.
Owners who follow these precautions — good prep, proper tape, careful install — often report spoilers staying well adhered for years, even under varied weather and driving conditions.
🧰 What You Should Do to Minimize Risk
Use recommended, automotive-grade adhesive (not cheap generic tape).
Clean the mounting surface thoroughly (isopropyl alcohol + degreaser) — no wax, grease, dust.
Install in a dry environment, within recommended temperature range (as specified by tape manufacturer).
Press firmly and evenly across the spoiler when installing; if possible, use light clamps or weights right after installation.
Allow proper curing time (often 24–48 hours) before driving or washing.
Periodically inspect edges and adhesive seams, especially after extreme weather, car washes, or highway driving.
🎯 Bottom Line
Yes — there is a non-zero risk that a spoiler can come loose or peel off over time, especially if installation is done poorly or cheap materials are used. But with high-quality adhesive, proper prep, correct installation, and good maintenance, Tesery carbon fiber spoilers remain secure for years.
What is Forged Carbon Fiber?
Forged carbon fiber is a premium carbon fiber manufacturing process:
Features:
- ✅ Unique Texture Marbled random pattern, each piece is one-of-a-kind
- ✅ Higher Strength 20% stronger than traditional 3K woven carbon fiber
- ✅ High Material Utilization Reduces waste, more eco-friendly
- ✅ Ultimate Luxury Preferred choice for supercars and high-end modifications
Price: Typically 20-30% more expensive than standard carbon fiber, but worth the premium.
Choosing Your Spoiler
How do I choose the right spoiler style for my Tesla?
Choose based on your needs and style preferences:
By Style:
- Performance Style (OEM-Inspired) Subtle elegance, perfect for daily driving and business use
- Sport Style Balanced sportiness, suitable for most owners
- VS-Style (Aggressive) Bold and aggressive, ideal for performance enthusiasts
- DC-Style (Minimalist) Narrower design, perfect for understated builds
- CMST Series Track-grade design for enthusiasts and track use
By Budget:
- $100-150 ABS spoilers
- $200-300 Standard carbon fiber spoilers
- $400-700 CMST premium carbon fiber series
How do I choose between glossy and matte finish?
Based on your vehicle color and personal preference:
Glossy Finish:
- ✅ Best for: White, red, blue, and other bright colors
- ✅ Effect: Deep reflective shine, carbon fiber weave more visible
- ✅ Style: Luxury, premium
Matte Finish:
- ✅ Best for: Black, gray, and other dark colors
- ✅ Effect: Understated, stealth, race-inspired
- ✅ Style: Sporty, minimalist
Installation & Maintenance
Does spoiler installation require drilling?
No drilling required! All Tesery spoilers use 3M VHB double-sided tape installation with these advantages:
- ✅ Non-Invasive No damage to body, preserves factory paint
- ✅ Super Strong Adhesion 3M VHB tape holds 10+ kg, tested at high speeds
- ✅ Reversible Can be removed with heat gun if needed
- ✅ Warranty-Friendly Does not affect Tesla factory warranty
Installation Time: Only 15-30 minutes, DIY-friendly.
Will installation Tesery's spoiler damage vehicle?
Highly unlikely — when done properly. Because the installation relies on strong double-sided adhesive instead of screws or bolts, there is no penetration of the trunk lid, hatch, or body panels. That means no holes, no drilling, no structural modification, and no inherent risk to paint or vehicle integrity under normal handling.
Important best practices:
Clean the bonding surface thoroughly (remove wax, oils, dust) before installing — adhesive bond strength depends heavily on surface prep.
Apply firm, even pressure across the spoiler during installation — including ends and corners — to fully activate the adhesive.
Allow proper curing time — typically avoid washing or exposing to rain/heat for the first 24–48h to ensure bond sets fully.
As long as you follow the installation instructions carefully, the spoiler adheres to the existing surface without damage.
✅ Conclusion
For Tesery's Tesla spoilers:
No drilling is required — installation uses pre-applied 3M adhesive tape.
No damage to the vehicle — provided installation is done properly, with clean surfaces and firm pressure.
In other words: It’s a safe, non-invasive upgrade — great for owners who want to add style or aerodynamic benefits without altering or risking their Tesla’s bodywork.
Can You Remove a Spoiler Later Without Damaging Paint or Trim?
Yes — in many cases, a spoiler attached with high-quality double-sided adhesive tape (like 3M VHB) can be removed without permanently damaging paint or trim — as long as you follow the right method and take care.
🔧 How and Why It Works (When Done Properly)
Many spoilers (including aftermarket carbon-fiber spoilers) are designed for adhesive/tape-mounting rather than drilling or bolting. That means no holes drilled into your bodywork — a major advantage for reversibility and preserving vehicle integrity.
When it’s time to remove the spoiler, you can soften the adhesive (with low, gentle heat — e.g. a hairdryer, not a high-heat gun) to make peeling easier and reduce risk of pulling paint.
A recommended technique: some detailers and DIY-ers use fishing line (or dental floss/nylon cord) to “saw” through the adhesive layer, gradually severing the bond without prying against the paint or trim.
After removal, adhesive-residue cleanup can be done safely using automotive-safe adhesive remover, isopropyl alcohol, or mild solvents — which dissolve leftover glue without harming paint.
Because no drilling is involved and you’re not forcibly prying or scraping, the original paint and trim remain intact — assuming you’re careful.
⚠️ What Could Go Wrong — and How to Avoid It
Removal can damage paint or trim if done carelessly. Common pitfalls:
Peeling too aggressively — if you simply grab a corner and yank the spoiler off, you risk peeling paint along with adhesive.
Using improper tools — metal scrapers or sharp pry tools can scratch or chip paint or clear coat. Always use a soft plastic scraper, nylon cord, or fishing line.
Excessive heat — while gentle heat helps soften adhesive, too much heat (or a high-power heat gun held close) can damage paint or clear coat.
Adhesive residue left behind — if not cleaned properly, leftover glue can attract dirt, discolor, or degrade paint over time. Use proper adhesive removers and follow with a wash or polish.
As one community user noted:
“It’s really easy to remove — but I’d use fishing line and go slowly, and clean off the residue carefully — that way you don’t scratch or pull the paint.”
🧰 Best Practice Steps for Safe Spoiler Removal
If you plan to remove/replace a spoiler, here’s a “safe-mode” checklist to minimize risk to paint:
Steps
1. Work in shade or garage — avoid direct sun or cold that makes adhesive brittle.
2. Warm the adhesive gently — use a hair dryer on low, don’t overheat.
3. Slide fishing line or nylon cord under one edge, gently “saw” back and forth to cut adhesive. Move slowly.
4. Once loosened, lift evenly — avoid twisting or sharp angles that stress paint.
5. Clean adhesive residue with a safe remover or isopropyl alcohol + soft cloth.
6. Rinse and optionally wax/polish — restore paint surface after adhesive removal.
✅ Conclusion
It is generally possible to remove a Tesla spoiler installed with adhesive tape later without damaging paint or trim — as long as you’re careful. The key is to avoid brute force, excessive heat, and metal tools; instead use soft heat + fishing line + gentle adhesive removal and work slowly. With proper technique, the removal is clean, reversible, and shouldn’t leave permanent marks.
How do I maintain and clean my spoiler?
Maintenance is very simple:
Daily Cleaning:
- Use pH-neutral car wash soap and soft sponge
- Avoid high-pressure water directly on edges
- Dry with microfiber towel
Carbon Fiber Spoiler Specific Care:
- Wax or apply ceramic coating every 3-6 months
- Avoid prolonged sun exposure (despite UV protection)
- Optional: Apply PPF (paint protection film) to prevent scratches
ABS Spoilers:
- No special maintenance required
- Safe for automatic car washes (after 7-day cure period)
What does UV protection mean?
UV protection refers to the multi-layer UV-resistant clear coat on the spoiler surface, which:
- ✅ Prevents Yellowing Blocks UV rays, maintains carbon fiber original color
- ✅ Prevents Fading Protects surface gloss
- ✅ Extends Lifespan Slows material aging
Warranty: Our UV protection coating comes with a 1-year warranty and can maintain its appearance for 3-5 years with proper care.
How long after installation can I wash my car?
Wait 48-72 hours for the 3M adhesive to fully cure:
- First 24 hours Keep painters tape in place
- 24-72 hours Avoid washing and high-speed driving
- After 72 hours Safe to wash (hand wash recommended)
- After 7 days Safe for automatic car washes
Temperature Impact: In cold environments (<15°C/59°F), extend cure time to 96 hours.
Can I install the spoiler myself? Do I need professional tools?
Absolutely DIY-friendly! No professional tools required:
Tools Needed:
- Isopropyl alcohol (surface cleaning)
- Painters tape (securing and marking position)
- Hair dryer (heating tape, optional)
- Microfiber towel
Installation Steps:
- Clean installation area (5 minutes)
- Test fit position (5 minutes)
- Remove adhesive backing, apply (5 minutes)
- Secure with painters tape for 24 hours
Difficulty Level: ⭐⭐☆☆☆ (Very Easy)
Purchase & After-Sales
Does installing a spoiler affect the car’s warranty or resale value?
✅ Warranty: What the law says about aftermarket parts
Under U.S. federal law — specifically the Magnuson‑Moss Warranty Act — simply installing aftermarket parts (like a spoiler) does not automatically void your vehicle’s factory warranty.
A manufacturer or dealer can only deny warranty coverage if they can prove that the aftermarket part directly caused the issue. For example, if the spoiler installation damaged wiring or caused a leak that led to another failure, they might deny coverage for that specific damage — but not because you simply “added a spoiler.”
That means for a non-intrusive spoiler installation (no drilling, no structural modification), you’re generally protected: the rest of your warranty stays intact as long as the spoiler itself isn’t the cause of the failure.
So in short: No — installing a spoiler doesn’t void your warranty by default.
🎯 Resale Value: How a spoiler might affect it
Installing a spoiler can affect resale value — but whether that effect is positive or negative depends on a few factors:
📈 Potential Benefits
Upgraded look & sporty appeal: A well-fitted carbon-fiber spoiler can enhance the aesthetic appeal of the car, making it more attractive to buyers who prefer a sporty or customized look.
Perceived performance / aerodynamic upgrade: Some buyers may see a spoiler as an upgrade — potentially improving aerodynamics or giving the car a more performance-oriented feel, which can add perceived value.
⚠️ Potential Drawbacks
Personal taste varies: Not all buyers want aftermarket modifications. Some prefer stock/unaltered cars — for them, a spoiler may appear excessive or not to their taste.
Concerns over installation quality: If the spoiler was installed poorly (uneven fitment, signs of peeling, or mismatched paint), it might detract from the car’s perceived quality, potentially lowering resale value.
Risk of hassle with warranty or inspection (if misunderstood): Even though legally the warranty shouldn’t be voided, some buyers/dealers may react negatively or ask questions if not familiar with the law.
✅ In Summary
Legally, an aftermarket spoiler does not void your warranty — as long as it does not cause damage or failure.
On resale value: a good-quality, properly installed spoiler can enhance appeal and even boost perceived value, especially for buyers who like sportier looks. But because tastes vary, it could also reduce attractiveness for buyers who prefer the original, unmodified look.
Can I pass vehicle inspection with a spoiler installed?
Yes! Our spoilers meet the following standards:
- ✅ Regulation CompliantDoes not exceed vehicle width, doesn't obstruct license plate or lights
- ✅ Safety DesignNo sharp edges, meets pedestrian protection regulations
- ✅ RemovableCan be temporarily removed for inspection if needed
Note: Regulations vary by region. We recommend checking with your local DMV before installation.
Is there a warranty? Can I return if not satisfied?
Yes! We provide comprehensive protection:
Warranty Policy:
- ✅ 1-Year Quality Warranty Covers material and workmanship defects
- ✅ UV Protection Warranty No yellowing within 1 year (with proper care)
Return Policy:
- ✅ 30-Day Money-Back Guarantee Full refund for unopened, unused items
- ⚠️ No Returns After Installation Once adhesive backing is removed, item is considered used
Shipping Protection:
- ✅ Free Shipping On orders over $149
- ✅ Damage Coverage Free replacement for shipping damage
Model Y Juniper Rocker Panel & Side Skirts Guide: Complete Comparison
Complete Model Y Juniper Body Kit Guide: Transform Your Tesla in 2026
Carbon Fiber vs ABS Spoilers: Which Should You Choose?
How to Install Model Y Juniper Spoiler: Complete DIY Guide
Ultimate Guide to Model Y Juniper Spoilers: Everything You Need to Know(2026)